Dual Frequency Card PVC Inlay is prelam (pre-laminating) packed with two RFID chips in different frequency range, the interaction of two different chips have been thoroughly considered, it can be used to produce dual frequency card (combi card).
1, it is designed to make two chips work in parallel, integrating two sets of RFID functional units into one card nest. Very useful in the application which needs multi-functional card, or transitional card.
2, our inlays are very sturdy and stands unequaled torsion and bending, is extremely durable and is with optimized read / write performance.
3, our inlays have a completely flat finish and bring numerous benefits to card manufacturers.
4, the cross mark and trimmed reference edge make the card manufacturer’s job easier.
Packing: PVC, PET, PET-G, PC
Antenna: copper coil, aluminum
Layout & size
extra-large size 56(7*8) layout is available, another layout can be customized.
125KHz, 13.56MHz, 915MHz
HF: Mifare S50, S70 / Ultralight/ Ntag213/Desfire(4k, 8k) / iCode slix / legic, FM11RF08 / C50 / ISSI4439
LF: EM4100 / EM4305/ EM4450 / ATA5577 / TK4100
UHF: Alien series and Impinj series
HF: Aluminum etching, pre-winding copper coil, ultrasonic wire implanting / ultrasonic welding
LF: Pre-winding copper coil
UHF: Aluminum etching
Dual Frequency Combination:
LF+HF, HF+UHF, LF+UHF
Direct pressure technique
Double-sided sheltering (ensures the flatness of the chip position, no bumps)
|-25°C ~ +65°C|
Dual frequency card inlay is semi-product to produce dual frequency card, which is mainly transitional card, or multi-function card.
Quality Control Photo:
Our testing platform can test many chips simultaneously, any faulty will be recognized and marked very conveniently, so every card inlay delivered to the card factory is good for direct production.